An Automatic Screw Feeder is, by design a very easy tool to use, that requires some basic understanding. Operators also called a Screw Feeder, a Screw Presenter or a Screw Dispenser and what it does is to replace whatever container is used in the assembly line to contain the Screw needed by the automated screw locking tool.
The way an Automatic Screw Feeder works, in its most simplistic definition, is to simply present the automatic screwdriver with the desired screw, fastened onto it, and so on and on. This means the Operator who doubles as the manual screw feeder won’t be wasting any more crucial time searching through the Screw Bin for the appropriate one, effectively improving the production time of your Assembly Line and therefore, the Company’s Profits.
Companies who have installed an Automatic Screw Feeder have seen its benefits in the very moment the machine is installed, which is a simple process. Operators also have found the use of an Automatic Screw Feeder to be incredibly simple. In some cases, even the Operator gets replaced by a Robotic Arms which takes over the process, simplifying even further the whole process of supplying Screws for the Automated Assembly Line, and in turn, also increasing the efficiency levels.
The question of how to properly use an Automatic Screw Feeder more than times than not is often asked by the System’s Designer or Production Engineer instead of the Operator himself. The reason is obvious, the Operator is more familiar with the intricate workings of the machine, having done training, certification, and reading the Operator’s Manual. Another reason why this question is mostly asked by people other than the Operator is that, for example, the System’s Designer or the production Engineer need to make the proper configuration for how, where, and when the Automatic Screw Feeder will “feed” the Screw for the Assembly Line. This process can be rather challenging, especially, because if you want your investment to turn in profit you have to properly configure it.
Here are a few tips as to how to get the most from your Automatic Screw Feeder.
Know Your Product.
The first thing you have to ask yourself when thinking about adding an Automatic Screw Feeder Machine to your Automated Assembly Line is whether or not it will be beneficial for the product you are manufacturing to have one of the said machines. It may look like a simple and out of place question, but it is not. There are Products that will enjoy the benefits of having an Automatic Screw Feeder machine, and effectively increasing production levels, but there are others that would not, and will create countless delays time and time again.
Positioning your Automatic Screw Feeder machine to get the most Benefits.
Another aspect to consider besides making sure that your product is benefiting from the Automatic Screw Feeder machine is that the machine is located in the right place along your Assembly Line.
Here are a few tips:
- The Machine must integrate easily into the regular flow of the Assembly Line.
- The Machine has to be easy to access by the operator or robotic arm.
- The Machine must be easy to clean-up and maintain.
For more info about the automatic screw locking machine,please kindly contact us as below:
Contact:
Person: James Yuan
Company: Huizhou Shengyang Industrial Co., Ltd
Add: 5th Floor,D Building,Jintaiyang Industrial Zone,Xingye Road,Zhongkai District,Huizhou,Guangdong,China
Tel: 86-752-6682869
Mobile:+86-13352636504
Email: [email protected]
Site: https://www.automaticchina.com/product-tag/automatic-screw-feeder-machine/
